FD-G-07
Inspector could not get in
FD30 · Ground, lift lobby to riser
Last signed inspection 12 Oct 2025, by Priya Nair
- Work restrictionOn hold: The riser behind FD-G-07 was locked when the register was made, so its lining board has not been surveyed. Sample it before any intrusive work.Work that disturbs the fabric waits until a competent person lifts it.
- Work restrictionRestrictions from HH-AR-01Hand tools only on frames. Do not drill, sand or cut the plant room door surround (FD-G-05): textured coating sample S3 contains asbestos. Stop and tell the manager if you find any material you are unsure of. For fire-stopping, cut out old sealant by hand: no power tools on wall linings.
Next step
- Who
- Priya Nair, inspector
- To do
- Carry out the annual inspection
- By when
- Was due 12 Oct, 15 days ago
What you can do here
Photos
No photos on FD-G-07 yet. Photos from inspections, faults, repairs and uploads all show here.
Inspect, check or report
Full inspection
Signed, competent inspector
The signed inspection by a competent inspector: 32 questions, evidence and the result.
Signed by a competent inspector: Priya Nair.
Staff check
Observation, not an inspection
Seven quick questions by site staff. An observation, not an inspection.
Do a staff checkReport a fault
Report, not a defect
Anyone on the building: what is wrong, a photo if you can, how urgent. The manager decides what happens. It is not a defect until then.
Report a fault
Rating FD30, installed 3 Jun 2019
- Rating on record
- FD30
- Leaf width
- 0.8 m
- Installed
- 3 Jun 2019
- Installed by
- Northgate Doorsets
- Next due
- 12 Oct 2026
- Open items
- 0
Why it is a fire door: Service riser (protected shaft); may be kept locked shut.
Ground floor plan with FD-G-07 marked
Where this plan came from
- Demo layout, made for this demo. It is not taken from a site drawing or survey.
1 open drawing or note on this floor. Drawings and notes on this floor are on the building plan. See drawings and notes
None waiting on this door
No Ledger Assist suggestions waiting on this door.
Work on FD-G-07
Before work starts
Restrictions
Hand tools only on frames. Do not drill, sand or cut the plant room door surround (FD-G-05): textured coating sample S3 contains asbestos. Stop and tell the manager if you find any material you are unsure of. For fire-stopping, cut out old sealant by hand: no power tools on wall linings.
From HH-AR-01, reviewed by Sam Whitfield
On hold: The riser behind FD-G-07 was locked when the register was made, so its lining board has not been surveyed. Sample it before any intrusive work.
Placed 27 Oct 2026 by Priya Nair. A competent person lifts it, with a justification.
- Asbestos registerHH-AR-01 v2Restrictions apply
Dated 18 Aug 2025, by Thorne Environmental (fictional)
Not covered: Roof void; lift shaft
Not accessed: Service riser behind FD-G-07 (locked on the day)
No repair is open on this door. No defect is open, so there is no fix to book.
Works programme
Plan a replacementHistory
Every change to this door's record: who did what, and when. Newest first.
All changes in this buildingSigned
Inspection by Priya Nair: not accessed; note: riser locked, key holder off site
By Priya Nair
Signed
Inspection by Priya Nair: signed, no defect found
By Priya Nair
Observation
Installed 3 Jun 2019 by Northgate Doorsets
By Sam Whitfield
Not signed in? Visitors see a shorter page and can report a fault.
See what a visitor sees